1. Base main motor 22kw, 2 single pit positions, 4 double pit positions

2. Door frame walking motor 0.75kw, 1 unit for single pit and 2 units for double pit

3. Transport main motor 4kw, 1 unit

4. Transport walking motor 0.75kw, 1 set

5. Fabric conveying motor 1.5kw, 1 set

6. Fabric rotating motor 1.5kw, 1 unit

7. Fabric rotating motor 1.5kw, 1 set

8. Fabric radius motor 0.37kw, 1 set

9. Vibration motor 1.5kw, 2 units

10. Core rod cooling air conditioner 75 (3P), 1 unit

11. Hydraulic part: 1 15kw oil pump

12. Cooling section: 4 0.75KW oil pumps

1、 Overview:

The XZ series core mold vibration pipe making equipment can produce socket, flexible tongue and groove, flat mouth, and F-type interface reinforced concrete drainage pipes. The nominal diameter of the pipes produced is DN800~3600, and the nominal length is 2~3m. It can also be specially designed according to user needs.

Equipment specifications, nominal diameter, nominal length, workstation interface form, remarks

Minimum, maximum, minimum, and maximum single and double socket flat mouth F-type

XZ2400 800 2400 2500 3000 √ √ √ √ √ √

XZ3000 1200 3000 2000 2500 √√√√√√√ Recommended

XZ3600 1350 3600 2000 2500 √ √ √ √ √ √

Note: The above are design specifications, and users can also contact our company for special design according to their needs

The core mold vibration tube making equipment has the following main characteristics compared to centrifugal equipment and hanging roller equipment:

1. This equipment has a high degree of automation and production efficiency in producing concrete pipes. Only one set of internal and external molds is needed for continuous production of each specification of pipe. The labor intensity of workers is low, and the equipment has good safety and reliability.

2. The vibration frequency and excitation force of the vibrator of this equipment can be adjusted according to the different specifications of the produced concrete pipes. The variable frequency and vibration excitation force can fully ensure the compactness of the concrete and ensure the quality of producing various specifications of concrete pipes.

3. The core mold vibration pipe making equipment produces concrete pipes using dry and hard concrete. The vibrator is installed in the core mold under the pit. After the product is vibrated and formed, it is immediately demolded for natural curing. Using this process reduces the pollution of noise and wastewater discharge to the environment, saves a lot of energy, and meets the requirements of modern industrial production for environmental protection.

4. The concrete pipes produced using core mold vibration pipe making equipment have stable product quality, and the inner and outer diameters of the pipes are equally accurate in size. By rubbing and rolling, the quality of the pipe mouth is good.

5. Using core mold vibration tube making equipment to produce concrete pipes, changing product specifications is very fast and convenient, and the required time is generally within 1 hour. The automation level is high, and the host can be operated by 1-2 people.

2、 Production capacity

The production capacity depends on the specific situation and the type of interface. The core mold vibration equipment can be arranged in a single station or dual station. The following output data (number of tubes produced per hour) is for reference only. These data are based on the manufacture of 2.5m long flexible interface enterprise mouth tubes (Danish tubes):

Product specifications: Number of units per hour, daily output (8 hours)

DN800 approximately 6 120M

DN1000 approximately 6 120M

DN1200 approximately 5 100M

DN1350 approximately 5 100M

DN1500 approximately 5 100M

DN1650 approximately 5 100M

DN1800 approximately 4 80M

DN2000 approximately 4 80M

DN2200 approximately 4 80M

DN2400 approximately 4 80M

DN2600 approximately 4 80M

DN2800 approximately 3 60M

DN3000 approximately 3 60M

DN3200 approximately 2 40M

DN3400 approximately 2 40M

DN3600 approximately 2 40M

The daily output should be accompanied by the corresponding number of bottom pallets and the number of removable socket protective covers per hour. If the second shift production is carried out, the annual output will double.